familyname=Turnout Drives
manufacturer=MD Electronics
definitionSource=JMRI
2025JMRIPhilGrainger12025-12-21PGInitial creationCV=41,","","0Not Calibrated","","1In Progress","","2In Progress","","3Calibrated"Has the drive been calibrated? (CV41)Drive Calibrated"
CV=24,23,"Number of Drive StepsHow many steps to fully throw the turnout - 1-2047 (CVs23,24)"
CV=22,"Time per StepTime taken oer step (m/sec) (CV22)"
CV=7,"Manufacturer Version No."
CV=8,"Manufacturer ID
        "
CV=120,"Category
        "
CV=121,"Number of Outputs
        "
CV=122,"Hardware Version"
CV=123,"Software Version"
CV=6,","","0Locked","","160Unlocked"Programming LockIs this locked against programming? (CV6)"
CV=25,","","0Normal","","1Inverted"Turnout InversionIs the operation inverted? (CV25)"
CV=17,","","0No Start Position","","1Start Thrown","","2Start Closed"Position at StartupTurnout position at startup (Closed, Thrown or None) (CV17)"
CV=27,"Position Reset DelayDelay before resetting turnout in 100's msecs (0=No reset) (CV27)"
CV=21,20,"Long Address"
CV=29,","Short Address","","Long Address",""Address Format"
CV=21,20,"Turnout AddressTurnout address (1-2047) (CV20,21)"
CV=13,","","0Disabled","","1Enabled"RailCom Ch1RailCom settings (CV13)"
CV=13,","","0Disabled","","1Enabled"RailCom Ch2RailCom settings (CV13)"
CV=13,","","0Disabled","","1Enabled"RailCom settings (CV13)RailCom High Power"
CV=13,","","0Disabled","","3Enabled"RailCom PlusRailCom settings (CV13)"
Addressing:Identification:BasicOperation:RailCom:Decoder Configuration